Remote CCTV Monitoring for Construction Sites
Protect equipment, materials, entrances and site activity after hours with real-time remote monitoring and escalation based on your response rules. Because monitoring is delivered remotely, construction sites across the U.S. can be evaluated for coverage through nationwide remote CCTV monitoring.
Construction sites lose the most when nobody is watching
Equipment, materials, and open perimeters — nights and weekends are when job sites are most vulnerable.
Equipment theft
Machinery, tools, and vehicles left on-site overnight are prime targets — and costly to replace mid-project.
Material theft & vandalism
Lumber, copper, and staged materials disappear after hours; vandalism sets schedules back by days.
Unauthorized entry
Open perimeters and multiple access points make it easy for trespassers to walk on unnoticed.
Weekend & night gaps
Most sites sit empty for 60+ hours every week. Recording-only cameras just document what you find Monday morning.
How SolvenHub Monitoring Works
Set up around your site plan, phases, and access schedule — no disruption to the workday.
Free security assessment
We review your site plan and current project phase — equipment yard, material staging areas, gates, and fencing — along with camera positions and the off-hours you need covered.
Secure camera access
Your existing site cameras connect securely to our monitoring desk — including temporary site setups and cameras moved as the work advances.
Night & weekend watch
Trained operators watch your equipment yard, staging areas, and gates live during nights, weekends, holidays, and shutdown periods — raising alerts as per your rulebook.
Clear reports
Morning summaries with screenshots, incident evidence, and activity logs for the current phase — ready for your site meeting.
What can be monitored on your site
Coverage follows your site plan — these are the zones contractors most often ask us to watch.
Machinery & equipment yards
Excavators, loaders, generators, and tool storage — watched through the night.
Material staging areas
Lumber, steel, copper, and deliveries staged for upcoming phases.
Gates & entrances
Vehicle and foot traffic at site gates, including after-hours arrivals.
Fencing & perimeter
Breaches, climbing, and movement along temporary fencing and boundaries.
Nights, weekends, holidays — covered
Your crew goes home. Our operators stay on the cameras.
After-hours watch
Live monitoring during the exact hours your site is empty — nights, weekends, and shutdown periods.
Gate activity log
Every vehicle and entry after hours is noted with timestamps — useful for delivery disputes and access reviews.
Morning summaries
Start each day with a clear picture of overnight activity instead of discovering problems on walkthrough.
A clear escalation workflow for every incident
You define who gets called and when. Our team executes it — no guesswork at 2 a.m.
Designated contacts notified
Site manager, superintendent, or owner — whoever you designate is notified as soon as suspicious activity is detected.
Escalation per your rulebook
Based on your approved escalation rules, incidents can be escalated to local authorities where appropriate.
Documented evidence
Timestamps, screenshots, and short video clips for incident reports, insurance, and police follow-up.
For example: if someone enters through a gap in the fencing or moves around the equipment yard at night, our operators review the feed live and alert your designated contacts right away — and, based on your approved escalation rules, the incident can be escalated to local authorities where appropriate.
What Happens When Activity Is Detected?
Every event follows the same disciplined path.
Detected
Entry through a fence gap, or movement in the equipment yard or staging area at night, when the site should be empty.
Reviewed
A trained operator reviews the yard, gate, and perimeter feeds live to see what is actually happening.
Alerted
Your designated contacts are alerted right away, following the escalation rules you approved.
Documented
Timestamps, screenshots, and clips are kept with the incident record for your follow-up, insurance, or police follow-up.
Recording-only cameras don’t protect a job site
Footage helps after a loss. Live monitoring helps prevent one.
Recording-only CCTV
Shows you what was taken and when — usually discovered Monday morning, long after the loss.
Live remote monitoring
Trained operators watch your equipment yard, staging areas, and gates live, so unauthorized entry or movement at night is spotted while it is happening — not found on Monday morning — and alerts go out based on your rules.
Custom plans available
Coverage by phase, by site, or across your project portfolio. Plans adapt as the job site changes.
Built for construction professionals
From a single job site to a full project portfolio.
General contractors
Protect every active job without stationing guards at each one.
Site managers & superintendents
Morning summaries and incident evidence that support your daily reports.
Developers & owners
Oversight of your asset through every phase — without daily site visits.
Equipment-heavy operations
Keep high-value machinery and vehicles under watch wherever they’re staged.
A monitoring partner U.S. businesses rely on
The same team and process behind our remote CCTV monitoring across the U.S.
Common questions
Still unsure? Message us on WhatsApp — we answer 24/7.
How does remote monitoring work for construction sites?
SolvenHub connects to your site’s cameras — including temporary site setups — and trained operators watch them live during your off-hours, detecting unauthorized activity and responding according to the escalation rules you define.
What parts of a job site can be monitored?
Equipment yards, material staging areas, site gates and entrances, fencing and perimeters — coverage follows your site plan and current phase.
Do you cover nights, weekends, and holidays?
Yes. Off-hours coverage is the core of this service — nights, weekends, holidays, and project shutdown periods, set around your schedule.
How do alerts and escalation work?
When our operators spot suspicious activity — for example, entry through a fence gap or movement in the equipment yard at night — we notify your designated contacts right away. Based on your approved escalation rules, incidents can be escalated to local authorities where appropriate.
What reports will I receive?
Morning summaries with screenshots, incident reports with timestamps and evidence clips, and activity logs — ready for your site meeting.
How do we get started?
We start with a free security assessment, review your site plan and cameras, define monitoring and escalation rules, securely connect your feeds, then begin monitoring and reporting.
How does monitoring adapt as the site layout changes between project phases?
Coverage follows your site plan and current phase. When the layout changes — a new staging area opens, fencing moves, or the equipment yard shifts — we review the updated site plan with you and adjust which cameras and zones are watched, so the areas that matter in the new phase are covered.
Are material deliveries and staging areas covered?
Yes. Material staging areas are among the zones we watch, along with the equipment yard, gates, and perimeter. When deliveries arrive during monitored hours, operators watch the staging and gate feeds live; any movement outside the expected delivery pattern is reviewed and your designated contacts are alerted according to your escalation rules.
Who gets alerted on a site with multiple contractors?
You designate the contacts for each situation in your escalation rules — for example, the site manager or superintendent first, then the owner. Our operators follow the rules you approved, so the right person is notified for each type of event, no matter which contractor’s area it involves.
Your site is already wired. Put trained eyes on it after hours.
Tell us about your site and schedule. We’ll build a customized monitoring plan around your phases.